Blackmer NP-Sliding Vane Pumps
Applications: Blackmer NP pumps are specifically designed to offer maximum versatility for handling a wide variety of clean non-corrosive liquids. The NP pump is ideal for applications that have varying fluid viscosity’s and temperatures. Typical applications include refined fuels, greases, solvents, chocolate, syrups, molasses, edible oils, black liquor, sodium silicate, tallow, wax, glues, adhesives, creosote, […]
Blackmer Frame S Centrifugal Pumps
The Frame S Pump is the heavy duty alternative to standard small frame pumps which can easily become overstressed when operated off the best efficiency point of its performance curve. The Frame S Pump provides mid-frame strength and reliability in small frame space. It can be installed in the same space, on the same baseplate, […]
Blackmer Frame M Centrifugal Pumps
Engineered reliability design incorporates industry-proven features that extend seal and bearing life and lower overall cost of ownership. Solid shaft with reduced overhang provides superior resistance to deflection. Shaft stiffness ratio (L3/D4) of 19 is the lowest for any pump in this size range. Maximum Flexibility: Available centerline mount for high temp applications Left or […]
Blackmer LD17 Centrifugal Pumps
The LD17 Pump’s solid shaft conquers vibration and greatly extends seal, bearing and shaft life. It resists the forces of destructive vibration far better than any other general process pump, reducing costly shutdowns. Its oversized angular contact thrust bearings are standard for high thrust capability and eliminate any axial movement of the shaft. System One […]
Atlas Copco Filters
In almost all applications, contamination of the air supply can cause serious performance decline and increase maintenance costs in terms of actual repairs and lost productivity. Atlas Copco’s innovative filtration solutions are engineered to cost-effectively provide the best quality air while exceeding today’s increasing quality demands. Atlas Copco designs filtration solutions to provide compressed air […]
Zeks ZTF Air Filters
ZTF Filters incorporate all the factors cecessary for efficient filtration of compressed air and gas, with features that allow them to be easily sized, installed, and maintained: Low pressure drop One flow direction for all applications Push-fit element connection (no tie-rod) Extensive connection and flow selection Restricted height installations Multiple filter element grades 300 psi […]
Atlas Copco Gx 2-11, 3-15HP
BASE UNIT SUPPLIED WITH THE FOLLOWING EQUIPMENT: Inlet air filter TEFC motor Differential pressure oil system with oil cooler Air/oil separator with oil level sight glass Oil filter V-belt drive with semi-automatic tensioning device Sound attenuating enclosure Factory oil fill Electro-pneumatic start/stop control Full voltage motor starter mounted and pre-wired Emergency stop button CSA/UL approved […]
Atlas Copco GA 5-11 VSD 7.5-15HP
PACK UNIT FEATURES: • Solid state variable frequency drive converter and control transformer • Dry type inlet air filter • High efficiency EPAct TEFC motor • Differential pressure oil system with aluminium block oil cooler and thermostatic bypass valve • Air/oil separator with oil level sight glass • Spin-on type oil filter with factory oil […]
Atlas Copco GA 5-11, 7.5-15HP
PACK UNIT FEATURES: High efficiency, EPAct compliant TEFC motor Inlet air filter Differential pressure oil system with oil cooler Air/oil separator with oil level sight glass Oil filter with factory oil fill Aftercooler Load/no load capacity control Sound attenuating enclosure Full voltage motor starter mounted and pre-wired Emergency stop button Moisture separator with automatic and […]