Blackmer NP-Sliding Vane Pumps
Applications: Blackmer NP pumps are specifically designed to offer maximum versatility for handling a wide variety of clean non-corrosive liquids. The NP pump is ideal for applications that have varying fluid viscosity’s and temperatures. Typical applications include refined fuels, greases, solvents, chocolate, syrups, molasses, edible oils, black liquor, sodium silicate, tallow, wax, glues, adhesives, creosote, […]
Blackmer Frame S Centrifugal Pumps
The Frame S Pump is the heavy duty alternative to standard small frame pumps which can easily become overstressed when operated off the best efficiency point of its performance curve. The Frame S Pump provides mid-frame strength and reliability in small frame space. It can be installed in the same space, on the same baseplate, […]
Blackmer Frame M Centrifugal Pumps
Engineered reliability design incorporates industry-proven features that extend seal and bearing life and lower overall cost of ownership. Solid shaft with reduced overhang provides superior resistance to deflection. Shaft stiffness ratio (L3/D4) of 19 is the lowest for any pump in this size range. Maximum Flexibility: Available centerline mount for high temp applications Left or […]
Blackmer LD17 Centrifugal Pumps
The LD17 Pump’s solid shaft conquers vibration and greatly extends seal, bearing and shaft life. It resists the forces of destructive vibration far better than any other general process pump, reducing costly shutdowns. Its oversized angular contact thrust bearings are standard for high thrust capability and eliminate any axial movement of the shaft. System One […]
Atlas Copco GA 11-30, 15-40HP
PACK UNITS FEATURE: • Inlet air filter (Class 1 or Class 2) • High efficiency TEFC motor • Differential pressure oil system with oil cooler • Air/oil separator with oil level sight glass • Oil filter and factory oil fill – unit is ready to use right away • Aftercooler • High performance gear drive […]
Atlas Copco GA 5-11 VSD 7.5-15HP
PACK UNIT FEATURES: • Solid state variable frequency drive converter and control transformer • Dry type inlet air filter • High efficiency EPAct TEFC motor • Differential pressure oil system with aluminium block oil cooler and thermostatic bypass valve • Air/oil separator with oil level sight glass • Spin-on type oil filter with factory oil […]
Atlas Copco GA 5-11, 7.5-15HP
PACK UNIT FEATURES: High efficiency, EPAct compliant TEFC motor Inlet air filter Differential pressure oil system with oil cooler Air/oil separator with oil level sight glass Oil filter with factory oil fill Aftercooler Load/no load capacity control Sound attenuating enclosure Full voltage motor starter mounted and pre-wired Emergency stop button Moisture separator with automatic and […]
Atlas Copco Gx 2-11, 3-15HP
BASE UNIT SUPPLIED WITH THE FOLLOWING EQUIPMENT: Inlet air filter TEFC motor Differential pressure oil system with oil cooler Air/oil separator with oil level sight glass Oil filter V-belt drive with semi-automatic tensioning device Sound attenuating enclosure Factory oil fill Electro-pneumatic start/stop control Full voltage motor starter mounted and pre-wired Emergency stop button CSA/UL approved […]
Atlas Copco KT Air Compressors, 5-20HP
Standard Features:• 12 V alternator on Honda engines• Pilot valve Standard Units:• Highly efficient air filter• Slow speed compressor pump with finned cylinder• Built in three pass aftercooler• Choice of single phase or three phase motor• Magnetic starter included• Large multi-blade flywheel• PVC coated wire belt guard• Start/stop pressure switch control Packaged Units:The standard unit […]