AIM-HPL
Synthetic Compressor Lubricant APPLICATIONS: AIM-HLP is made with a very thermally and oxidatively stable polyol ester (POE) blend. This full synthetic premium lubricant is formulated to form less varnish under high temperature applications and to be more resistant to acidic intake air than the polyalkylene glycol coolants and other synthetics on the market. Under normal […]
AIM-CLEANER
Rotary-Screw compressor cleaner and system flush APPLICATIONS: AIM-CLEANER is a premium quality synthetic fluid designed to dissolve varnish and solubilize sludge from rotary-screw air compressors during operation. It can also be used as a system flush when changing-over from mineral to synthetic oils in order to reduce contamination due to oil carry-over. Regular use of […]
AIM-BLOWER OIL 220
PREMIUM SYNTHETIC LUBRICANT APPLICATIONS: AIM-Blower Oil 220 is formulated from premium polyalphaolefin (PAO) base fluids, optimized for use in positive displacement blowers and vacuum pumps. Custom blended to provide outstanding protection even in demanding operating conditions. AIM-Blower Oil 220 is designed to withstand blower discharge temperatures up to 250o F. Formulated for maximum equipment life […]
Atlas Copco Rotary Screw Compressors
Rotary air compressors are positive displacement compressors. The most common rotary air compressor is the single stage helical or spiral lobe oil flooded screw air compressor. These compressors consist of two rotors within a casing where the rotors compress the air internally. There are no valves. These units are basically oil cooled (with air cooled […]
Atlas Copco GA VSD+
Atls Copco GA VSD+ Atlas Copco’s GA VSD+ range brings a game-changing innovation to the general industry. The GA 7-37 VSD+ variable speed drive compressor reduces your energy consumption by a staggering 50% on average, compared to idling compressors. At the same time it offers improved performance, silent operation (down to 62 dB(A)) and a […]
AIM Tire Inflation System
The AIM AIR tire inflation station is designed for automatic tire inflation with a digital controller. Set the required air pressure and attach hose to tire with clip-on hose end. Unit will automatically inflate the tire to the desired pressure and signal when finished. Remove the hose and let the self-retracting reel pull the hose […]
Hydro-Thermal Solaris Heater
Requiring no mechanical mixers, motors, external steam valves or condensate return systems, the Solaris® Hydroheater® is the simplest solution for heating paper stock and other thick and viscous materials uniformly. Handles paper stock and materials up to 12% consistency High velocity steam injection ensures homogeneous heating without mixers or motors Constant steam pressure and velocity […]
Hydro-Thermal Industrial Heater
The Industrial Direct Steam Injection Heater The Hydroheater heats water, or other slurries, to a specified temperature through direct injection of a controlled amount of steam. If you require: Uniform cooking of your liquid or slurry Precise temperature control Shorter production time Reduced unscheduled downtime Reduced carbon footprint Then the Industrial Hydroheater is the product […]
Hydro-Thermal EZ Heater
Use EZ Heater instead of heat exchangers or spargers to get: Exceptional energy saving Precise temperature control Instantaneous hot water from 2 to 600 gpm [7.5 l/m – 2.2 kl/m] Large temperature rise Heavy duty 316 stainless Self cleaning Exceptional turn-down ratio Quiet, hammer free Space savings Reduced maintenance EZ Heater® is the most efficient […]
Zeks Heatsink Refrigerated Air Dryer
Energy Saving Dryers HeatSink® Cycling Dryers ZEKS HeatSink refrigerated dryers ensure that energy is consumed in proportion to actual demand for dried compressed air. The dryer refrigeration system automatically cycles on and off to maintain stored cooling energy in a cold thermal storage module. Every model incorporates efficient heat exchangers – designed specifically for compressed […]